Boiler Control Devices
It has 2x16 LCD screen and touch keypad,
Marked and easy menu provides convenient setting,
It can work dependent on the room thermostat. In this way, it works depending on the temperature of the room and provides energy saving as well as providing a comfortable warming pleasure by fixing the room temperature.
The program has the clock at the desired hours when the boiler runs in sleep mode.
Detects that the fuel has run out and automatically stops the operation of the boiler. In this way, the boiler does not work in vain.
Automatic Frost Protection feature prevents the installation water from freezing in cold weather when the boiler is off.
Thermostat, Fuel Hold and Fuel Drive settings can be made with extremely high sensitivity.
When the temperature reaches 35 degrees, the Circulation Pump switches on automatically and automatically turns off when it falls below 30 degrees.
It reads temperature with 1 degree accuracy and processes with 1 degree precision.
Fuel Fan (bellows fan) and Circulation pump can be operated directly without the use of contactors.
It is recommended to connect the Fuel Drive Motor (Gearbox) by means of a contactor in between, but it can be connected at the pole.
All motor and electrical connections can be made with plug-in terminal blocks.
Both mounting and electrical connections are demounted. In this way, manufacturing and service labor is minimized.
The temperature sensor is of NTC type and can be easily extended up to 25 meters.
In short, everything is under your control and fully automated. We're officially turning your boiler into a boiler.
Physical Properties | |
Type of Device | Boiler Control Devices |
Device Size | 70 mm X 145 mm X 125 mm |
Weight of Device | 316 gram |
Storage Temperature / Operating Temperature | -20 C to +60 C |
Storage Humidity / Operating Humidity | 90% max. (None condensing) |
Installation | Fixed installation |
Operating Conditions | Continuous |
Environmental Ratings | Standard, indoor at an altitude of less than 2000 meters with none condensing humidity. |
Device Supply Voltage and Power | 220V AC |
Temperature Sensor Inputs | NTC(10K) |
Accuracy | +-%1 |
Sensor Break Protection | Upscale |
Reading Frequency | 600 ms |
Input Resistance | 1k |
Electrical Life | 50.000 Operation - Full Load |
Display | LCD |
Compliant Standards | CE, TSE |
Operational Properties | |
It can work dependent on the room Thermostat. In this way, it works depending on the temperature of the room and provides energy saving as well as providing a comfortable warming pleasure by fixing the room temperature. | |
The program has the clock at the desired hours when the boiler runs in sleep mode. | |
Detects that the fuel has run out and automatically stops the operation of the boiler. In this way, the boiler does not work in vain. | |
Automatic Frost Protection feature prevents the installation water from freezing in cold weather when the boiler is off. | |
Thermostat, Fuel Hold and Fuel Drive settings can be made with extremely high sensitivity. | |
When the temperature reaches 35 degrees, the Circulation Pump switches on automatically and automatically turns off when it falls below 30 degrees. | |
It reads temperature with 1degree accuracy and processes with 1degree precision. | |
Fuel Fan (bellows fan) and Circulation pump can be operated directly without the use of contactors. | |
It is recommended to connect the Fuel Drive Motor (Gearbox) by means of a contactor in between, but it can be connected at the pole. | |
All motor and electrical connections can be made with plug-in terminal blocks. | |
Both mounting and electrical connections are demounted. In this way, manufacturing and service labor is minimized. | |
In short, everything is under your control and fully automated. We're officially turning your boiler into a boiler. |